Hunan Feishanqi Construction Technology Co., Ltd.
language
Zinc magnesium aluminum template
keywords：
classification：
Product Details
- 产品描述
-
Core parameters
○ Material: JL-07-01 high-strength alloy steel | Yield/Tensile Strength: >700MPa | Elongation: 22%
○ Structure: Double vertical rib space structure | Wall thickness: 1.5mm | Weight per square meter: 25-28KG
○ Specification: 100~400 width adapted to 50 modulus | Bezel height: 65mm | Hole spacing: 50mm
○ Surface treatment: Sprayed with anti-rust oil | Design turnover: 200~300 timesFour major performance tests
◆ Bearing capacity> 60KN/㎡
The ultimate bearing capacity reaches 91KN/㎡
◆ Stiffness 45KN/㎡
The deflection under load is only 0.87mm
◆ Strength 60KN/㎡
The residual deformation after load unloading is only 0.1mm
◆ Crack resistance
6.7 tons of steel coil concentrated impact, no cracking of welds
Independent production of all categories + application adaptation in all scenarios
Wall panel top plate, plate belt C groove, sunny corner connector, corner C groove, back flute, beam/bottom support head
◆ Pull tab type system
Quick installation and quick disassembly, no screw holes in the wall, suitable for high-rise residences, apartments, affordable housing and other standardized and rushing construction schedule scenarios.
◆ Screw system
It has a strong bearing capacity and a stable system, and is suitable for large public buildings, super high-rise core tubes, bridges, pipe corridors and other large side pressure and high-demand scenarios.
Four dimensions to achieve cost reduction and efficiency increase in templates
◆ Lightweight and high efficiency
The weight of a single square meter is comparable to that of aluminum molds, manual handling/hoisting is convenient, a single team is installed 30-50 square meters per day, the number of tower crane lifting times is reduced by 30%, and the construction efficiency is significantly improved.
◆ Full environmental protection and high recycling
100% steel recycling, no construction waste, in line with the green building policy, stable residual value (2000 yuan/ton), and no pressure on later disposal.
◆ High precision plaster-free
The forming flatness is ≤±0.5mm/2m, and the pass rate of wall verticality is 98%+, which directly eliminates the plastering process and reduces the labor and material costs in the later stage.
◆ High turnover and low loss
200-300 times of recycling, refurbishment only needs to be polished + anti-rust oil, and the refurbishment cost is only about 10 yuan/㎡, which is far lower than the aluminum mold of 40 yuan/㎡, and there is almost no material loss.
Product comparison
High-strength alloy steel formwork VS aluminum mold VS wood mold
Comparison item Feishanqi high-strength alloy steel formwork Aluminum formwork Wooden formwork Panel material 1.5mm high-strength alloy steel 4.0mm aluminum formwork 12/15mm wooden formwork Bearing capacity 60KN/m², good integrity 50KN/m², good integrity 30KN/m², poor integrity Reuse More than 200 times More than 200 times 5-8 times Construction efficiency 30-50m²/day/person 30-50m²/day/person 15-20m²/day/person Ease of demolding If it does not stick to ash, you can brush less mold release agent Easy to stick mold, mold release agent must be brushed Easy to stick mold and need to be handled frequently Refurbishment costs Low (shot blasting only) High (needs to be cleaned, edged milled) None (one-time consumption) Template cost 15-20 yuan/m² 20-28 yuan/m² 25-45 yuan/m² Reduce plastering costs 12- 18 yuan/m² 12- 18 yuan/m² 0 Recycling value High (30% or more) High (30% or more) No, a clean-up fee will be charged FSQ High Strength Alloy Steel Formwork VS Universal Alloy Steel Formwork
Contrast dimensions Feishanqi high-strength alloy steel formwork Market ordinary alloy steel formwork Core value for customers Molding effect The flatness and verticality meet the acceptance standards of aluminum formwork, which can achieve the effect of plaster-free clean concrete, without seams and misalignment. There are often visible seams and misalignments, and the flatness is average, and subsequent repair and leveling are often required. Ensure molding quality: Meet high-level finish requirements, save the cost and construction time of secondary repairs, and improve the quality of the project. Welding quality Welding quality: The use of reinforced welds, the width ≥ 4mm, and the length of the weld is more than 30% longer than the industry standard, and the structural firmness is significantly improved. The weld width is generally 2-3mm, which is the standard length, and it is prone to the risk of cracking after long-term use. Ensure safety and durability: reduce the risk of mold burst and open welding from the root, and the overall life of the formwork is longer, making it safer to use. Detail and durability Special reinforcement design is carried out for key stressed parts such as pin holes, edge banding plates, and stiffeners. Most of them are general standard designs, and they are easy to deform or crack at stress concentrations after multiple uses. Reduced long-term costs: significantly increase the number of formwork turnovers, reduce the frequency of replacements, and reduce the cost of use per use. Production process Customized tooling fixtures are used throughout the process for positioning, assembly and welding to ensure accuracy and consistency. Relying on manual experience and general tools, it is difficult to ensure the consistency of product size and quality. Ensure construction efficiency: achieve standardized and high-precision production, faster on-site assembly, and stable and controllable construction effect. Quality assurance system Establish a systematic operation process and employee skills training system to ensure strict implementation and continuous optimization of process standards from the management and talent levels. Lack of systematic management, quality stability depends on the state of individual workers, and fluctuates greatly. (1) High reliability of delivery: ensure long-term stable and reliable product quality.
(2) Build long-term trust: It has the ability to continuously improve and provide stable services, and is a trustworthy long-term partner.
Leave Messages
Hotline
Address
South of Yingwu Road, Tianyi Demonstration Zone, Xiangtan City, Hunan Province, China
Powered by www.300.cn ChangSha